YSTHK直線板式導軌,THK直線板式導軌作用

直線板式導軌是一種薄輕型直線導軌。

直線導軌適于測量?jī)x器、

半導體制造和檢驗設備以及其他直線運動至為重要的應用場合。

3 action speed, acceleration and deceleration and other specifications by the load quality limit.

See P.26 ~ 32 "GLM20AP Selection Method". 

與角接觸球軸承的雙列式樣相比，此產品實現了緊湊化及輕量化。

較大限度使結構緊湊的同時，也具有高剛性。

※4　設定可搬送質量為加速度約2G、到達較高速度1.0m/s時，可在負載比50%下驅動一定行程的質量。

by the thrust and speed characteristics of the impact of the quality of action may change.

Precision linear plate type ER type precision linear plate type rail ER type is a kind of ultra-thin ultra-light linear guide.

ER type is most suitable for precision measuring instruments, 

semiconductor manufacturing and testing equipment and other precision linear motion is an important application.

To achieve 5,000min-1 (maximum DN value of 160,000) under long-term continuous drive when the stability of the torque

在周?chē)鷾囟葹?0℃的環境下，電樞繞組平均溫度為90℃時的數值。

※2　較高速度隨分辨率而變化。

例：電機型式…S型、驅動器型號…TD-045CU-200AC-GA20SU、分辨率…0.1μm時，較高速度為0.3m/s。

※3　動作速度、加減速度等規格受負荷質量的限制。

The maximum transportable mass is the mass that can be delivered at an acceleration of about 0.5G.

The RAU type is an ultra-small cross roller collar 

with an inner diameter of 10 mm and an outer diameter of 21 mm (minimum model RAU1005).

但根據動作條件的不同，受推力和速度特性的影響，可動作質量可能會發生變化。 

直線板式導軌ER型 直線板式導軌ER型是一種薄輕型直線導軌。

ER型適于測量?jī)x器、半導體制造和檢驗設備以及其他直線運動至為重要的應用場合。  

實現5,000min-1（較高DN值16萬）下長期連續驅動時穩定的扭矩。 

2.(DIN69051)為基準

 螺母尺寸以DIN規格(DIN69051)為基準 

3.緊湊的螺母尺寸

 新研發的薄膜密封減小了螺母長度，實現了裝置的緊湊化設計。

4.豐富的產品種類

 軸徑φ15～φ50、導程5～20㎜的組合產品26種。

Compared with the double-row design of angular contact ball bearings, this product is compact and lightweight.

The maximum to make the structure at the same time, also has high rigidity.

※ 4 can be set to send the quality of the acceleration of about 2G, 

to reach the maximum speed of 1.0m / s, the load ratio of 50% can drive a certain trip quality.

But depending on the operating conditions, 

參見P.26～32“GLM20AP選型方法”。較大可搬送質量為加速度約0.5G時可搬送的質量。

RAU型是內徑10mm、外徑21mm（小型號 RAU1005）的小型交叉滾柱軸環。

YSTHK直線板式導軌,THK直線板式導軌作用